PDA

View Full Version : IRQ conflicts



BRADLEE
28-01-2005, 10:27 PM
Anyone know how to re-assign the IRQ's of your PC hardware if having a conflict? Other than moving the physical hardware from it current port???

Barely Human
28-01-2005, 11:53 PM
Are they plug and play? I would just uninstall the hardware and let windows pick them up again.

BRADLEE
29-01-2005, 01:01 AM
I'm not sure I was just asking for a friend because he had asked me. I'm ok with hardware, but whenever I have an IRQ conflict I usually physically re-install that object in another slot.

Barely Human
29-01-2005, 08:47 AM
Ok, heres a few things that ive found out...

Apparently, only the 2 top slots have the same IRQ, so if he's having conflicts between those slots, then its probably best to move on of them to the 3rd or 4th slot down.

And here is an intresting thread i found that might be of use - http://www.techspot.com/vb/archive/index/t-4116.html

Hope you can sort it bud...

MangaFish
01-02-2005, 11:19 PM
i used to know how to manually assign IRQs in win95, but never needed to since i switched to windows 2000. might be through the same mothord of device manager in comtrol pannel

Milesy
02-02-2005, 11:54 PM
yeah you can change the IRQ in a devices properties in device manager

278d7e64a374de26f==