-= FREE VST Plugins Thread =-

[loopdon]

GMulti



All GVST plug-ins require 'gdiplus.dll' .

http://www.gvst.co.uk/gdiplus.zip

GMulti is a three-band compressor and stereo enhancer.

First, the signal is split at user-defined frequencies into three bands. Each of these bands can then be compressed independently and have its stereo width altered before being mixed back together.

The compression of each band is specified in the usual manner with threshold, ratio, attack and release controls.

The GUI contains gain-reduction meters for each band, which have a resolution of 1dB per bar. There is also a before/after waveform display, which can display any of the three bands. The waveform display features a zoom control, which allows the display to be scaled for optimum viewing.

The stereo enhancement works by amplifying or diminishing the stereo information in each band. If you set a Width parameter to 0% then the associated band is collapsed to mono, which is often desirable for the bass band.

The Mix parameter allows the pre-compression signal to be mixed back into the output signal. You can use this to restore some of the dynamics of the original signal.

Parameters
Gain: The gain applied to the incoming signal.

Low Cut: Attenuate the signal below this frequency.

Freq 1: The cross-over frequency between the first and second bands.

Freq 2: The cross-over frequency between the second and third bands.

Thresh: The compression threshold.

Ratio: The amount of compression to impart above the threshold.

Attack: The speed that compression takes effect.

Release: The speed that compression relaxes when the level drops.

Width: The amount by which the stereo image is accentuated.

Level: Volume adjustment.

M: Mute switch.

Mix: Mix the pre- and post-compression signals.

http://www.gvst.co.uk/gmulti.htm

http://www.gvst.co.uk/GMulti.zip

[loopdon]

MB Puncher



A Limiter with automatic gain makeup.
Red LEDs indicate clipping, the green LED
indicates signal above threshold

Release time can be adjusted from 1 to 2000 ms
Soft saturation can be added to output signal

http://mitglied.lycos.de/mbplugins/

http://mitglied.lycos.de/mbplugins/MB%20Puncher.zip

[loopdon]

MBole Filter



A multi-effect plugin that features
4 filter types (each 12dB/oct or 24dB/oct slope),
ring modulator with 3 waveforms, downsampler,
stereo delay, envelope generator and a 3 waveform LFO

Inspired by Waldorf DPole Filter

http://mitglied.lycos.de/mbplugins/

http://mitglied.lycos.de/mbplugins/MBole%20Filter.zip

[loopdon]

SynceDelay



Two individual delay lines,
one for each chanel

Delay time is synced to host tempo
(1/1, 1/2, 1/4, 1/8, 1/16, 1/2., 1/4., 1/8., 1/16., 1/2t, 1/4t, 1/8t, 1/16t)

A high pass filter is placed before the delay and
a low pass filter in the feedback line for delay damping

The input chanels can be variably routed to the delay lines
and outputs can be individually paned

http://mitglied.lycos.de/mbplugins/

http://mitglied.lycos.de/mbplugins/SynceDelay.zip

[loopdon]

STS-24 - Space Transition Synthesizer

for Pads, Textures, Soundscapes & Athmospherics



This synthesizer is featuring Wave-Transition method for absolute unique atmospheres, soundscapes, pads & textures. A very straight userinterface with 3 "Lazy"-Buttons for randomizing different sets of parameters so programming this synthesizer is incredibly easy. The Transition method adds a stunning new dimension and motion for an evolving sound changing completely it's characteristics. Although this is an amazingly "simple" structured synthesizer it gains its astounding sound from the Transition method between the oscillators.

The basic features are:
# New: 30 new internal waves added
# New: LFO 4 with more than 40 patternlike waveforms
# New: Stereo delay now with Cross delay option
# New: Stereo flanger with very flexible modulations and resonant LPFilter
# New: Space rotation for sound rotating in stereo width
# New: Both filters with Filter FM driven by two osc. sources each
# New: ext. Audio Input switchable for Osc. A-1
# Four digital PCM-wave oscillators powered by 127 selectable waveforms
# X-Torsion function for oscillators
# two resonant filters (24db Lowpass and 12 db Highpass)
# three ADSR-style envelope generators
# two LFO (bpm-synced)
# one LFO with shapeable and even patternlike waveforms (bpm-synced)
# one Sample & Hold (bpm-synced)

The Pro version incorporates loading of User Soundfonts & wavefiles (up to 24 Bit), more voices instead of two in free version. The free version is supplied with 128 patches - the Pro version comes with 384 patches.

http://www.hgf-synthesizer.de/

Download locations for the Free Version (with 2 voices instead of 7):

http://hgf-synthesizer.de/se/dl/STS-24free.zip

[loopdon]

This plugin has caused quite a stir over at k-v-r audio forums:

Fuzzpilz Oatmeal



Above is a skinned version... /LD

"The name says it all - it's a fairly generic thing, mostly written because I wanted to mess with VST development and such, having mostly kept to Buzz only before; my next VSTi, if/when it happens, will be better or at least more interesting.

As the screenshot should tell you, it's your basic 2-osc subtractive synth deal, with things and stuff. It comes with some documentation and a few rather simple presets; there's also a random patch generator that at least works better than just setting each parameter to a random value. "

http://lesitedeburnie.free.fr/Oatmeal-35.5-21032006.rar

"And the best or at least the most usable skin I've found so far is Yeager's and you can download it here :

http://members.home.nl/peterfox/
"

[loopdon]

Daft Funk v1.0



Glitch accelerator.

Specs:

- X-Y panel: X controls speed, Y controls LowPass Filter and volumen optionally.

- Mode: "Pitched" means the wave will be resampled as speed is beeing modulated. "Grainy" means the wave will not change pitch but the grains will change size as speed is beeing modulated.

- Sync mode: "BPM" or "Free"

- Note subdivision selector.

- Y->Vol (Y value to Volume) button.

- Zero - X: Useful only in "Grainy" mode, this parameter is useful to avoid clicks, but if you want to go very fast you better untick this option, otherwise you'll hear an artifact in where the pitch transitions aren't smooth on very high frequencies.

- X and Y spring buttons: Enable disable spring release on them.

- Smooth knob: This smooths out the X and Y values, high values result on slow response to quick movements, useful to make slow sweeps such as on one Daft Punk famous song.

- Grain size knob: When in "Free" mode (opposed to BPM) you can specify the grain size here.

http://klanglabs.siliconemusic.com/

http://klanglabs.siliconemusic.com/f.../daft_funk.zip

[loopdon]

mgTempoDelay



version: v0.22 alpha
- tempo synced stereo delay
- feedback with resonant filter and saturation
- additional LP/HP output filters
- left/right delay-offset for true ping-pong-effects
- additional ducker & gate
- plugin in vst format
- all parameters automatable

http://www.mgaudio.de/modules/main.p...s&lang=eng

http://www.mgaudio.de/modules/main.p...download_delay

[loopdon]

i really dig that bi-filter, awesome one, thanks!

thanks for the reply!! i just wanted to tell you bifilter 2 (filterbank2) is out (payware) - it really is the dogs bollox :eyes:

i beta-tested it and my name is listed somewhere in the plugin :cheese:

http://www.tone2.com/

demo:

http://www.tone2.com/Tone2_FilterBan...demo_setup.exe

(Demo: Stops sound after 10 minutes) - should be enuff for rendering :)

[loopdon]

mgPhaseShifter



version: v0.24 alpha
- pseudo stereo effect
- shifts left or right channel to obtain stereo effect
- additional LR balance fader
- plugin in vst format
- all parameters automatable

http://www.mgaudio.de/modules/main.php

http://www.mgaudio.de/downloads/mgPhaseShifter.rar

[loopdon]

Lost Technology



Lost Technology separates incoming audio signals into amplitude, frequency and waveform (harmonic content) signals, modulates those part signals and then merges them into audio signals again.

The plug-in takes two inputs and produces two outputs. The Analyzer component splits the input signal, the Modulator components combine part signals in various ways and the Synthesizer component merges three part signals into audio output.

http://www.cenara.com/users/ce00423/

This is the primary binary release, consisting of a plug-in DLL with custom GUI and the reference manual:

http://www.cenara.com/users/ce00423/...stTech-0.1.zip

This is an alternative binary release, consisting of a plug-in DLL without custom GUI and the reference manual. This variant uses the default look-and-feel of the host application instead of the one shown in the screenshot in the manual but the signal processing code is exactly the same:

http://www.cenara.com/users/ce00423/...hNoGUI-0.1.zip

[loopdon]

Charsiesis

(new VST chorus(ish))



"It's a ridiculous sort of chorus (I'm sorry for the pun, but it had to be done), more or less (you certainly can do either more or less than that with it); read the included text file for more information.

Slightly beta-y at the moment, but don't worry about compatibility of future patches."

http://bicycle-for-slugs.org/charsiesis2-1.zip


--> supposed to be pretty wicked :cheese:

[loopdon]

Mirror1

Morphing convolution effect



"It is based on our new morphing convolution engine. You can do seamless morphing along several impulse responses in a bank.
There are 15 banks (groups of IRs).
There are more than 100 IRs.

Impulse responses have been extracted through chains of hardware devices.

This plugin has been developed in collaboration with sinkmusic here @kvr (GUI and IRs)
Who is interested can take part in our Impulse Library collab-ware project (more on sknote)

It is free and you can download it from www.sknote.it

Please remember that this first version needs 44100Hz samplerate in your host!"

Features:

-More than 100 impulses responses embedded
-Morphing convolution engine
-One big slider for seamless morphing between IRs in a bank
-Lo-cut and Hi-cut filters
-Dry-wet mix control
-Simple interface

Requires SSE extension (Pentium IV or equivalent one):

http://www.sknote.it/Download/Mirror1_0-0-1.zip

[loopdon]

CHIMERA



CHIMERA:
Chimera is an experimental synth that uses subtractive synthesis in a new way. White noise is sent through a series of narrow bandpass filters which are controlled by pitch. The filtered noise is used as resonant sinewaves to create pads, atmospheres, organs and percussive sounds. In other words, everything you hear from Chimera is white noise being filtered into music - in realtime.

Chimera has a rich modulation section consisting of three modulation envelopes and three lfo's with cross modulation.But there are also amplitude envelopes for each of the three Elements and built in effects featuring delay and distortion.

Chimera is a living, breathing organism. Think of it like an acoustic instrument, like a saxophone. Two notes will never sound the same on a saxophone and there's only a certain range of sounds that a saxophone can make. The same is true for Chimera.

http://www.majken.se/vst/index.asp?Page=chimera.asp

http://www.majken.se/vst/download/chimera-v1.0.zip

[loopdon]

PhazOsc - Phase Distortion Synth



- Phase distortion synth offering velocity control on both the amp and timbre.
- Delay and chorus are also included.
-Audio trigger section consists of only two knobs, (Gate) which sets the gates strength (Decay) which sets the gates time re-trigger. (Please read the manual)
-64 presets to get you started

http://207.218.248.76/~fretted/atsynths.html#PhazOsc

Online Manual:

http://207.218.248.76/~fretted/phazosc/index.html

Download:

http://207.218.248.76/~fretted/downloads/PhazOsc.zip

Please read the manual control section for trigger setup
Use your neck pickup for best pitch tracking

[loopdon]

Guitar Controlled Bass Synth v3.0



Designed as a bass synth, can also be used for many different synth and percussion sounds.
- Phase distortion oscillator, two wave selectors with eight waveforms each and modulation depth. Sub, bass and normal octaves.
- Can be altered by one of sixteen different preset waveshapers.
- A seperate sub osc can be set equal to or one octave lower than the main oscillator and can enter the signal chain pre or post filter.
- Two filters: Moog type and Low pass. Variable envelope amount with controls for attack, decay and sustain.
- Amp section with control of attack, decay and sustain.
- Audio trigger section consists of only two knobs, (Gate) which sets the gates strength (Decay) which sets the gates time re-trigger. (Please read the manual)
- 128 presets to get you started.

http://207.218.248.76/~fretted/atsynths.html#PhazOsc

http://207.218.248.76/~fretted/downloads/GCBS.zip

Please read the manual control section for trigger setup
Use your neck pickup for best pitch tracking

[loopdon]

String Sculptor v2.0



- A Texture synth with the capability to create anything from a smooth mono pad to leads and host synced dance rhythms.
- Three VA style oscillators, each with an independant waveshaper, tuning and filter routing.
- Noise section with a choice of ten noise waves, level an filter routing are also provided.
- Three filter banks each with a choice of seven filter types.
- Seperate amp provided for each filter bank.
- Modulation with host sync.
- Effect section provides chorus, host synced delays and reverb.
- Audio trigger section consists of only two knobs, (Gate) which sets the gates strength (Decay) which sets the gates time re-trigger. (Please read the manual)
- 128 presets to get you started.

http://207.218.248.76/~fretted/atsynths.html#PhazOsc

http://207.218.248.76/~fretted/downl...ngSculptor.zip

[loopdon]

Tripp Lead



- Lead synth with a fat bottom and screaming syncs, may also be tamed to become a smooth airy synth with it's dual filters.
- Two VA style oscillators, square sub oscillator and a noise osc.
- Modulation with host sync and an envelope generator, provide a choice of many destinations.
- Two different moog style filters allow you to choose each one independantly run them parallel or serial.
- Tube overdrive and distortion, with control of the tube hard/soft amount.
- Auto pan synced to 1/2. 1/4 and eighth notes on the BPM setting, can be applied to the main oscillator and the delay seperately.
- A mono delay with modulation and a low pass filter, synced to the BPM setting.
- A reverb with limited control is also provided.
- Audio trigger section consists of only two knobs, (Gate) which sets the gates strength (Decay) which sets the gates time re-trigger. (Please read the manual)
- 128 presets to get you started.

http://207.218.248.76/~fretted/atsynths.html#PhazOsc

http://207.218.248.76/~fretted/downloads/TrippLead.zip

Please read the manual control section for trigger setup
Use your neck pickup for best pitch tracking

[loopdon]

Wow, more than 10.000 views :)

So i guess this thread is rather popular :eyes:

But where the **** are the replies???????

[StoQ]

hey m8 ;] im after format c: which of those free vsti would u recommend? mostly im lookin for some hardcore fx plugins, some filters that could shake junk ass. cheers